Before material is cut into individual sheets, there can be a large sag created by the mismatch of speeds between two rollers. A global manufacturer sought to use laser distance sensors to improve the performance of their production lines.
Continue readingA maker of foundation pile testing equipment uses laser rangefinders to collect set data, acquiring it much faster than hammer impacts. The rangefinder is affixed to a stationary base. The automated equipment is set up prior to starting of the hammer and does not require the use of manual recording methods.
Continue readingA major audio speaker manufacturer contacted Acuity to help solve a challenging applied measurement problem. In this sound vibrations scenario, a sensor with fast frequency response was needed to profile the entire amplitude of cone movement.
Continue readingOur customer from the lumber industry is using the AS2100 laser sensor to measure the length of cut lumber as it moves down the mill. With a measurement range of over 300 feet on natural targets and an accuracy of 0.040″ at 20 Hz, the AS2100 is a good fit for this customer.
Continue readingFor distance measurements on hot surfaces or in bright lighting conditions, the Acuity AS2100 series is superior to previous Time-of-Flight lasers.
Continue readingWhen it comes to vehicle dynamics, providing precise ride height measurement from the vehicle to the ground is critical for testing different variables under one measurement.
Continue readingIt is a complicated process to create vision-guided robotics, imaging systems, and dimensioning systems. For their systems Artemis Vision chose AR200 lasers from Acuity.
Continue readingAcuity has had many customers request that the AR1000 long range laser sensor be able to provide a color Touch Panel Display that can output the measurement format in English unit fractions.
Continue readingVisit Acuity at the Automotive Testing Expo!
Continue readingAn existing Acuity customer asked for a longer range, high accuracy laser triangulation single spot laser sensor to measure deflection. To keep the laser out of an area that can damage the laser sensor, we created the AR700-2 Long range model.
Continue reading
