One of the issues doors can have is that they are too thick or too thin for a good fit. Laser displacement sensors in a dual opposed mode can make thickness measurements to hold several thousand’s of an inch as doors move down the conveyor line.
Continue readingAcuity has released a very compact laser line sensor space restricted applications.
Continue readingOne of Acuity’s customers, Ames Engineering has developed a 2D and 3D laser texture scanner using the Acuity AR200 laser measurement sensor inside their portable and GPS-enabled Texture Scanner.
Continue readingA large US manufacturer has an application where they need to align 2 painted metal surfaces to be parallel to one another very accurately and quickly. By using the AP820-240 model which has a laser line length of 120 mm the laser line is place across the 2 metal surfaces.
Continue readingA customer has an application where they needed to be able to measure the width of a woven material very accurately as it is being made. The customer decided to use the Acuity AP820-80 laser line sensor that projects a laser line of 580 points across a laser line of a 2.5″ length.
Continue readingOne of Acuity’s existing customers wanted to be able to measure the thickness of a clear and semi-transparent film online. By using the white light confocal chromatic CL4 MG35 probe on a CCS Prima controller, the customer was able to hold +/- 0.6 microns of thickness accuracy.
Continue readingRecently a customer has asked Acuity for help in being able to measure the volume of different packages sizes coming down a conveyor line.
Continue readingMany manufactures have a requirement to accurately measure the angles of their products on line and adjust the process to reduce waste.
Continue readingAn Acuity medical customer is using the Initial 4.0 model to create a 3D scan of medical samples to measure the change in the surface features. This technology is able to measure on any target surface including clear and mirror surfaces.
Continue readingOne of Acuity’s customers is a large sheet metal fabricator and is using the AP820-1000 blue laser line sensor to control the position of the steel plate in the slitter line.
Continue reading
