Pick the right laser for crane positioning and anti-collision, from range and reflectors to EtherNet/IP and PLC connections.
Continue readingChoosing a laser thickness gauge? Check material, one vs. two sensors, accuracy, line speed and mounting before you buy.
Continue readingAcuity sensor application preventing drill string whirl with three Acuity AR700-16s mounted 120 degrees around the drill collar pipe.
Continue readingA stone fabrication company uses our AS1100 Long Distance Sensor to measure the length of each slab before it is cut with a wet saw. As well, the AS1100 is mounted a bit off-axis to avoid an obstruction.
Continue readingWhether you need to measure small cargo before packing it into a Unit Load Device (ULD), or make sure large cargo can fit through the plane’s cargo door, our AS1100 Long Distance Sensor can give you the information you need to load your cargo efficiently and safely.
Continue readingA company has dump trucks bringing materials into one of their buildings, but when the drivers dump their load, they don’t always remember to lower the dump box back into position before trying to drive out. After some costly repairs they came to us for help.
Continue readingNeed to calculate coil length remaining on a coil roll? Laser sensors can give you accurate and simple non-contact length measurements.
Continue readingOne method for monitoring inventory stacks and inventory management systems is using non-contact thickness measurement either during production, at an inspection station, or post-production.
Continue readingOur new Sessions allows the Touch Panel to detect when an object enters the sensor’s range and displays the average, maximum, minimum, and mode of the measurements after it passes by. As the name “Sessions” implies, this can be done with as many sequences as you need to get your highly accurate measurement.
Continue readingManagers of bulk solids carefully monitor their stockpile height measurements for both overfill prevention and inventory management. These directors of heaped goods — such as grain, gravel, ore — are often looking for stockpile measurement with high-accuracy, non-contact methods.
Continue reading
