Touch Panel Display **NEW**
The Acuity™ Touch Panel Display is a stand-alone terminal interface for use with Acuity laser distance sensors. These fully-enclosed units replace panel meters, alphnumeric displays and analog controllers by providing a modern interface through a full-color LCD and touch screen. The Touch Panel Display communicates with one or two Acuity sensors using their serial interfaces. Sensors can be easily configured using on-screen buttons to display and scale their distance outputs. Relative dimensions can be measured using a tare function. With dual RS232 serial inputs from two Acuity sensors, the touch panel serves as a thickness gauge and display, an application which previously demanded a PC computer and custom software programming. Using a single RS485 serial interface, the Panel can transmit thickness and dimensional information to external devices.
Download the Touch Panel Display data sheet (PDF 1MB)

Alphanumeric display

This product option is a simple alphunemeric character display. It comes with AC power plug and 6 foot cord. The AR4000 sensor's RS232 output is connected directly to the display via terminal blocks. The product is manufactured by Vorne and is an encased display with bright green characters, .35" high. The display uses vacuum fluorescent technology. It displays output from the AR4000 rangefinder serial port in inches or mm, or current loop. The green dot matrix vacuum fluorescent unit displays 20 characters in one line. The rugged display panel supports 128 ASCII characters. Dimensions: 9.7" by 2.8" by 4.6" deep. 10.0" by 3.1" panel flange. Power options include 110 VAC or DC power options.

View more technical information about the display at the Vorne Industries website.